Leitz 100 150 P4 blade separator assembly
$95.00
Skip to product information
New item. 3d printed replacement
If you are looking for other similar items contact me
You will have to reuse your old blades and 4 screws that hold the 2 plastic bits together (they just drop in the plastic)
Uncommon tools needed:
- Circlip removal tool (that is the one with the red handle)
- Stanley knife ( or a different knife with a trapezoidal blade)
Assembly tips:
- Remove smaller circlip with a stanley knife. Press it in the gap and turn it right. Be careful as the circlip is likely to shoot out
- The bolts are fragile. If it is difficult to undo them use WD-40 or similar lubricant and leave it for a few hours
- If you are struggling to put the metal guides into the slots use a screwdriver as a lever (shown in picture with the red screwdriver)
- Apply fresh grease (not shown)
Leitz 100 150 P4 blade separator assembly
$95.00