Clippable DeWalt Toughsystem 1.0 floor and wall mount (1 set)
$28.00
Skip to product information
3d printed
Please install them by putting them onto tool box
Used for wall or floor mounting a dewalt tstak box (fits all versions). Pictured with Toughsystem 1.0 here
Screws are supplied (the ones in the pictures are 4 mm x 20 / 0.157 inch x 0.787 inch)
How to install:
- Put the clamp inside the holes of the mounting blocks. Make sure the mounting holes are facing outside of the box.
- Before you put in the screws position the blocks by hand in a way that will make the box drop in the same way as in the pictures (Once it gets in the right position you will notice it will visibly drop a few mm/a fraction of an inch)
- make sure you get the blocks as tight as you can so that the box will not slide forwards / backwards after you fasten the screws
- fasten the screws while simultaneously holding the blocks down so they will not shift their positions
Clippable DeWalt Toughsystem 1.0 floor and wall mount (1 set)
$28.00